Once in a while, individual(s) finds themselves in a situation where the need for a vape device is dire. The condition could be personal, for a relative, or for a friend. Indeed, experience has taught me that, when the need presents, the following Hellvape Dead Rabbit V3 RDA will be an l solution.
The experience was worse. I wouldn’t be happy to find someone in a similar state. When I was about to give up, my networks helped me locate a company with such vape devices as HellVape Dead Rabbit V3 RDA, HellVape Dead Rabbit SE RDA, and HellVape Dead Rabbit V2 RDA, among others. It helped me a lot because a friend needed to overcome his dependency habit.
HellVape Dead Rabbit v3
- Excellent quality with a perfect design.
- Perfect flavor.
- Produce vapor excellently.
- Ease to build on.
- Have a smooth airflow (none turbulent).
- Deck O – rings are a little thicker, making seating the barrel a little bit difficult.
- The posts lack sufficient lifting, which interferes with the fitting of the large clippers.
Package Includes:
1 x Dead Rabbit 3 RDA（Resin Drip Tip）
2 x 0.37Ω Ni80 Fused Clapton Coils
2 x Shoelace Cotton
1 x BF Pin
1 x Accessory bag
Specifications
- 24mm Diameter
- 5mm Deep Juice Well
- Stainless Steel Chassis Construction
- Dual Post Build Deck – 2 Terminals Per Post
- Top Side Secured via Flathead Screws
- Single or Dual Coil Configuration
- Positive Peek Insulation
- Dual Airflow Top Cap
- 810 Drip Tip
- Threaded 510 Connection
- Squonk Capable
Design and Build Quality
HellVape Dead Rabbit V3 RDA produces high-quality flavor and vapor yet at a reasonable price.
First and foremost, the airflow includes an upgrade of two-directional airflow, which produces a smooth and tasty draw. Squonking perfection gets achieved by making the juice well more excellent and more profound.
Furthermore, Hellvape upgraded the side feeding valves, which are now uniquely designed to enhance a quicker transference of the liquid to the cotton. Various users have different color preferences, something ensured by the production of V3 RDA in eight different colors. Their packaging is, without question, above par.
Airflow Cap/Ring
The airflow cap/ring consists of Stainless Steel with a decoration that helps in turning. It has a floating top that has an embedded O – ring that holds the 510 mouthpiece rightfully. There is then a resin Ag+ mouthpiece that contains a Hellvape engraved metal ring around the shaft.
The airflow cap body has two types of airflow (3 slot airflow holes and 15 honeycomb airflow holes) on each side. The airflow ring presents a dome-like effect so that should there be stray liquid, it will easily drop down to the coils.
Build Deck and Wicking
Hellvape have uniquely identified their product’s base by ensuring that the words of the product and its serial number are engraved on the bottom. Additionally, there is a 510 gold-coated connection pin that may swap out for a squonk pin.
The base also contains two O-rings which enable the barrel to slip over. They are a bit thick, so that it may take some time to seat the barrel appropriately. There is the enablement of a hybrid connection with the finely turned 510 threading and the pin that sticks out.
HellVape Dead Rabbit V3 RDA build deck contains a 5mm deep and juice well made in a manner that can not in any way enable leakage. The building deck also contains a side feeding design to enhance e-juice transferring to cotton through BF pin.
Performance
Generally, HellVape Dead Rabbit V3 RDA performs perfectly. Anyone can ideally use it as a dripper on various mods, as I observed my friend succeed in quite a number. Building the RDA is easy even if one wants to prepare a single coil or dual coils, which is achieved by dropping the coils into the posts holes and then tightening the screws.
Notably, I observed my friend try out various coils of different sizes, with 3.5mm being his best preference on both single and dual coils.
Building for both squonk RDAs and dripper is easier, and similar processes involve switching the pins for squoking. Use the coils that come with the kit.
Recommendation: Cut the coils using the Coily tool.
1. After cutting the coils, pulse and strum them.
2. Load the cotton into the coils. Afterward, cut, trim, and tuck it into the deck.
3. This is followed by dampening the coils and the cotton with some liquid.
4. Resemble and enjoy whatever mod you please.
Verdict
During my short experience with HellVape Dead Rabbit V3 RDA, I can attest that it gives good flavor and excellent vapor quality. Building on the deck is easy. Anyone can comfortably use it as a dripper and for squonking, among others.
Do you intend to start vaping? Well, HellVape Dead Rabbit V3 RDA is your authentic solution.
