VandyVape BSKR V3 MTL RTA Review

As a hobbyist vapor who recently switched to Mouth to Lung (MTL) vaping, I was amazed at the plethora of rebuildable tanks on the market. In my search for an excellent vaping experience, I came across the Vandyvape BSKR V3 MTL RTA. Herein is my take on this rebuildable tank atomizer.

v

VandyVape BSKR V3 MTL RTA

8.5
4.5/5
Review Score

Save 10% With Code VAS10

  Pros

  Cons

Package Includes:

1 x B3MTL RTA
2 x Drip Tip
1 x Accessory Bag
1 x Instruction Manual
1 x PEI Tube 2ml
1 x PEI Tube 6ml(Not Included in TPD Edition)
1 x Glass Tube 6ml(Not Included in TPD Edition)
3 x Airflow Pipe
2 x Superfine MTL Fused Clapton Coil 0.74Ω

Specifications

  • Material: Stainless Steel + Pyrex Glass + PEI
  • E-Juice Capacity: 2mL / 4.5mL
  • All Parts Detachable And Reassembled
  • Clear And PEI Tubes Included
  • Short, Medium And Long Drip Tips Included
  • Twist to open top refill design
  • 4 Various Airflow Tubes Included: 0.8, 1.2, 1.4, 2.0
  • Direct to coil airflow
  • Large Single Coil Building Deck

Design and Build Quality

Vandyvape BSKR V3 MTL RTA is an aesthetically pleasing rebuildable tank atomizer with a more attractive design than its predecessor, the BSKR V2. With a 24mm base diameter, this tank is small, simple, and refined. It will look great atop many mods and sit without overhanging.

 

You can get this tank in five colors- matte black, gun metal, stainless steel, gold, and frosted grey. The base and top cap of the Vandyvape BSKR V3 MTL RTA have knurling, which not only adds to the attractive design but also ensured extra grip. The Berserker logo is imprinted on the front, but otherwise, the overall design looks clean and smooth.

 

One thing I like about the Vandyvape BSKR V3 MTL RTA is the number of goodies you get with the tank. The box includes 4 tank sections, 4 airflow inserts, and 3 drip tips. Two of the 4 tank sections are made out of glass, and the other two out of heat-resistant plastic (PEI).

 

Out the box, the BSKR V3 MTL RTA has the 2ml glass tank section installed. You can easily switch to any of the 6ml tank sections. The drip tips have the same bore but vary in height. Two are all black, while one features a base with a metal ring. A great detail is that the rings match the color of the tank.

 

The drip tips are size 510, so you can switch them for any 510 drip tips with O-rings. Further, you can completely disassemble the Vandyvape BSKR V3 MTL RTA, including the airflow pin and drip tip, allowing you to easily clean it out if you wish.

Build Deck and Wicking

Vandyvape BSKR V3 MTL RTA Review - vapenav (4)

BSKR V3 MTL RTA features a build deck that’s very similar to its predecessor. The build deck is a two-terminal, two-post deck with grub screws securing the top. The deck can fit one small coil.

 

Vandy Vape includes 2 fused Clapton coils (2.5mm 0.74Ω) in the box that fit the build deck perfectly. Once I installed the coil, I found that wicking was fairly easy. You have to use your own cotton since none is included in the package.

 

Ideally, the cotton should be snug but not too tight to avoid deforming the coil as it pulls through. The ends of the cotton should be cut such that they go down the wicking channels (located on either side of the build deck) and out and through wicking holes at the side of the build deck. The cotton should be enough to fill the wicking holes to avoid flooding the build deck. Getting the wicking right is a breeze; just ensure you have sufficient cotton, and you fill the wicking holes nicely.

Performance

Vandyvape BSKR V3 MTL RTA Review - vapenav (1)

If you install the 2.5mm fused Clapton coil that comes in the BSKR V3 MTL RTA box, the wattage comes out at about 0.73Ω, which is very close to the 0.74Ω listing. This MTL tank is designed to be used at low wattages.

 

Vaping is excellent on the BSKR V3 MTL RTA with an amazing flavor even though you’ll be vaping at low wattages. The airflow is quiet and smooth regardless of the inserts you use.

 

Nonetheless, the range of airflow inserts accommodates all types of MTL vapors. If you prefer a tight MTL vape, the 0.8mm and 1.2mm inserts perform well. If you like a loose MTL, draw the 1.4mm, and 2.0mm have you covered.

Verdict

Vandy Vape and VapersMD’s Alex have developed a great user-friendly and versatile tank with good performance and an attractive design. The BSKR V3 MTL RTA is quiet regardless of the airflow insert and provides an excellent vaping experience at low wattages. You get a wide range of MTL draws from the airflow inserts, recommendable for all MTL preferences.

Save 10% With Code VAS10

Leave a Reply

Your email address will not be published. Required fields are marked *